Side profile for an attractive handrail. Can be used in conjunction with four different cutters to produce different handrail tops.Dimensions:Diameter=32 mmCutting Length: 38 mmBearing Diameter: 16 mmCutting Radius 1: 9.5 ...

Edge moulding only.Dimensions:Diameter: 20mmCutting Length: 20mmBearing Diameter: 16mmCutting Radius: 2mmShank Diameter: 1/4 inchPlease note that prices in the Trend Catalogue download, if shown below, may differ t...

Edge moulding only.Supplied with one bearing.Dimensions:Diameter: 22mmCutting Length: 25mmBearing Diameter: 16mmCutting Radius: 3mmShank Diameter: 1/4 inchPlease note that prices in the Trend Catalogue download...

Self-guiding cutter with facility to change profile by fitting large bearing and varying the depth. Supplied with two bearings.Dimensions:Diameter: 28.5mmCutting Length: 12.7mmBearing Diameter: 9.5mm & 12.7mmCutting Radius...

Roman ogee with self guiding facility. To change profile use larger bearing and vary the depth. Supplied with two bearings.Dimensions:Diameter: 25.4mmCutting Length: 15.9mmBearing Diameter: 9.5 & 12.7mmCutting Radius: 4mm

Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings.Dimensions:Diameter: 25.4mmCutting Length: 16mmBearing Diameter: 9.5mm & 12.7mmCuttin...

Self-guiding cutter with facility to change profile by fitting large bearing and varying the depth. Supplied with two bearings.Dimensions:Diameter: 35mmCutting Length: 17.5mmBearing Diameter: 9.5mm & 12.7mmCutting Radius 1...

Self-guiding cutter with facility to change profile by fitting large bearing and varying the depth. Supplied with two bearings.For stationary machines - 18000RPM recommended speed.Dimensions:Diameter: 63mmCutting Length: 20mm

For use in a router table only.Take 5-6 passes at repeated depths.For stationary machines - max. 16000 RPM recommended speed.Dimensions:Diameter: 67mmCutting Length: 16mmBearing Diameter: 12.7mmCutting Radius: 17.5mm

This cutter is available in set Refs. PDS/1X1/2TC & PDS/2X1/2TC. For stationary machines or portable routers mounted in a table at 16000 RPM recommended speed.Dimensions:Diameter: 67mmCutting Length: 16mmBearing Diameter: 12.7...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile.Dimensions:Diameter: 34.9mmCutting Length: 18mmBearing Diameter: 9.5mm & 12.7mmCutting Radius: 11.1mmShank Diameter: 1/...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile.Dimensions:Diameter: 38mmCutting Length: 19mmBearing Diameter: 9.5mm & 12.7mmCutting Radius: 12.7mmShank Diameter: 1/4 ...

Trend B´Guided Ovolo 12.7mm Rad 3.2mm Ste (Tct Router Cutter Range / Large Step Round Over & Ovolo)A bearing guided round over & ovolo router cutter supplied with three ball bearings to give a rounding over and two sizes of step ovolo mould o...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile.Dimensions:Diameter: 38mmCutting Length: 19mmBearing Diameter: 9.5mm & 12.7mmCutting Radius: 12.7mmShank Diameter: 1/2 ...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile.Dimensions:Diameter: 41.1mmCutting Length: 20mmBearing Diameter: 9.5 & 12.7mmCutting Radius: 14.2mmShank Diameter: 12mm...

Trend B´Guided Ovolo 15.9mm Rad 3.2mm Ste (Tct Router Cutter Range / Large Step Round Over & Ovolo)A bearing guided round over & ovolo router cutter supplied with three ball bearings to give a rounding over and two sizes of step ovolo mould o...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile.Dimensions:Diameter: 42.7mmCutting Length: 22.3mmOverall Length: 70mmBearing Diameter: 9.5mm & 12.7mmCutting Radius: 15...

Cutter supplied with two bearings. Larger bearing removes the quirk producing a round over profile.Dimensions:Diameter: 44.5mmCutting Length: 22mmBearing Diameter: 9.5mm & 12.7mmCutting Radius: 16mmShank Diameter: 1/2 ...