Ideal for following templates for panelling and profiling in furniture manufacture.It is advisable that the template is at least 5mm thicker than the cut length of the cutter.Complete with one bearing.Dimensions:Diameter: 22mm...

Self-guiding cutter with facility to change profile by fitting large bearing & varying the depth. Supplied with two bearings.Dimensions:Diameter: 29mmCutting Length: 12.7mmBearing Diameter: 9.5mm & 12.7mmCutting Radius: 4m...

Ideal for following templates for panelling and profiling in furniture manufacture.It is advisable that the template is at least 5mm thicker than the cut length of the cutter.Complete with one bearing.Dimensions:Diameter=35 mm...

Bearing guided classic style cutter.Supplied with two bearings.Dimensions:Diameter: 32mmCutting Length: 12.7mmBearing Diameter: 12.7mm & 16mmCutting Radius: 5mmShank Diameter: 1/4 inchPlease note that prices in...

Self guiding classic cutters with facility to change profile by fitting larger bearing and varying the depth. Supplied with two bearings.Dimensions:Diameter: 35mmCutting Length: 22mmBearing Diameter: 9.5mm & 12.7mmCutting ...

Self-guiding cutter with facility to change profile by fitting large bearing & varying the depth. Supplied with two bearings.Dimensions:Diameter: 38mmCutting Length: 16mmBearing Diameter: 9.5mm & 12.7mmCutting Radius: 6mm

Self-guiding cutter with facility to change profile by fitting large bearing & varying the depth. Supplied with two bearings.For stationary machines - 18000 RPM recommended speed.Dimensions:Diameter: 51mmCutting Length: 24mm

Shank mounted bearing follows template mounted on board surface.It is advisable that the template is at least 5mm thicker than the cut length of the cutter.Complete with one bearing.Dimensions:Diameter: 35mmCutting Length: 14....

This cutter & Ref. PSC/3X1/2TC are available as a set Ref. PDS/3X1/2TC. For stationary machines or portable routers mounted in a table at 16000 RPM recommended speed.Dimensions:Diameter: 63.5mmCutting Length: 12.7mmBearing Dia...

The bearing eases setting up & enables curved edges to be profiled.Dimensions:Diameter: 22mmCutting Length: 16mmBearing Diameter: 16mmCutting Radius: 10mmShank Diameter: 1/4 inchPlease note that prices in the Trend...

By making a second pass at 90 degrees a full corner bead can be cut.Dimensions:Diameter: 23mmDiameter: 20mmBearing Diameter: 16mmCutting Radius: 2mmShank Diameter: 1/4 inchPlease note that prices in the Trend Catal...

By making a second pass at 90 degrees a full corner bead can be cut.Dimensions:Diameter: 22mmDiameter: 18.9mmBearing Diameter: 12.7mmCutting Radius: 3.2mmShank Diameter: 1/4 inchPlease note that prices in the Trend...

By making a second pass at 90 degrees a full corner bead can be cut.Dimensions:Diameter: 28mmDiameter: 25.7mmBearing Diameter: 16mmCutting Radius: 4.8mmShank Diameter: 1/4 inchPlease note that prices in the Trend C...

By making a second pass at 90 degrees a full corner bead can be cut.Dimensions:Diameter: 28mmDiameter: 25.7mmBearing Diameter: 16mmCutting Radius: 4.8mmShank Diameter: 1/2 inchPlease note that prices in the Trend C...

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees.Dimensions:Diameter=31.9 mmCutting Radius 1: 7 mmShank Diameter: 1/4 inchPlease note that prices in the Trend Catalogue d...

By making a second pass at 90 degrees a full corner bead can be cut.Dimensions:Diameter: 31.9mmDiameter: 28.6mmBearing Diameter: 16mmCutting Radius: 7mmShank Diameter: 1/2 inchPlease note that prices in the Trend C...

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees.Dimensions:Diameter=38.1 mmCutting Radius 1: 9.5 mmShank Diameter: 1/2 inchPlease note that prices in the Trend Catalogue...

The two bearings offer the means of cutting different depths of mouldings.Two bearings are supplied.Dimensions:Diameter: 34.9mmCutting Length: 16mmBearing Diameter: 9.5mm & 12.7mmCutting Radius: 12.7mmShank Diameter: 1...