The screw head surface lies completely flat on the ring magnet of the screw holder, thus enabling problem free retention and screwing without any tilting or loss. Vertical and horizontal screwing can be carried out easily using only one hand. Fits any...

A complete selection of blades for all current electronic saws. Contents: Metal saw-blades: * 100 mm bi-metallic saw blade with 24 teeth / inch * 100mm bi-metallic saw-blade with 14 teeth / inch * 150 mm bi-metallic saw-blade with 8 teeth / inch Wood...

You will receive: * 3 x titanium staged drill HSS4241: 1 x 4-12 mm (5 stages), 1 x 4-12 mm (9 stages), 1 x 4-20 mm (9 stages) * 3 x titanium milling drill HSS4241: 1 of each 5 mm / 6 mm / 8 mm * 1 x quick change bit adapter A complete set for working...

-> Can also be used as a depth limiting device -> Containing: 3.2 -3.6 -4 -4.4 - 4.8 -5.2 and 5.6mm. Complete in a neatly designed wooden case

The Westfalia electronic surface milling cutter is ideal for creative, high accuracy work in groove milling, routing, profile milling, long-hole milling, copy milling, freehand milling or stationary milling. The milling depth is set using the clamp bolt...

Wave profile. Max speed 4500 rpm. One each brushes 25, 40, 50, 63 and 75 mm diam. With three 6 mm diam attachment mandrels. Complete 8 piece set.

High quality electronic tool set with 6 different screwdrivers and 2 micro pliers. The screwdrivers have the following tips: * 2 x cross-headed * 2 x slot-headed * 2 x Torx In addition there are also side-cutters and pointed pliers. All come in a practical...

For single-handed Angle grinders with a M14 retainer (for peripheral speed up to 80/sec). 1 Wire brush 60mm, 1 elastic Rubber Plate with flange nut M14, 115mm, 1 Lambs wool polishing cap, 5 sorted fibre discs.

8-piece mini HSS twist drills. Shank diam 2.3 mm.

The professional polishing method for the high-gloss polishing of metal, plastic, marble etc. Contents: * Pre-polishing paste * Polishing paste * Clamping mandrel * 3 felt buffing wheels 50, 75, 100 mm for optimum surface finishes. The polishing disks...

Strong magnet to optimise the fixing of the hexagonal screw head or hexagonal nuts. Can be used for machine and hand powered tools. Very good for deep areas. Contents: One of each 150 x 6 / 7 / 8 / 9 / 10 / 11 / 12 + 13

600% longer life and higher cutting speeds compared with conventional spiral auger bits. For precise, highly accurate, splinter-free holes in veneered plywood, as well as all natural hard, soft and end-grain woods. Specially milled spiral profile with...

Extensive blade assortment for working with wood, plastic, tile, walls, etc. Versatile. Ideally suited for cutting, scraping, soaking, joint milling, etc. Content: * 2 blades each 10 and 22 mm wide * 1 round saw blade for wood and plastic * 1 round carbide...

9 piece brass, wire and paint brushes. Shank diam 2.5 mm.

suitable for angle drills. 2-10mm diam, 1-mm increments.In accordance with DIN 1897.

For simple loosening of screws up to 80mm ø. 4 possible adjustments. With padded jaws to protect chrome pipes etc. With insulation coated handles. Made from high quality steel.

For manual applications and for use on eccentric grinders. Can be easily cut to the required measurements. Very flexible and easy to handle. These don't get clogged up quickly and are easy to clean with water or compressed air. For cleaning-up parts with...

For manual applications and for use on eccentric grinders. Can be easily cut to the required measurements. Very flexible and easy to handle. These don't get clogged up quickly and are easy to clean with water or compressed air. For cleaning-up parts with...