Quick and easy end to end dovetail jointing with router in one operation.For decorative panelling, floorboards, skirting, jointing offcuts and tongue and grooving.Solid aluminium template.Adjustable template offset.Can be taken to the...

For picture hanging flush to the wall.Plunge cutter & move forward, then retract out from entry hole.A template is recommended.Dimensions:Diameter: 3/8 inchDiameter: 9.5mmD2=4.5mmCutting Length: 11/64 inchCutting L...

A keyhole recess for picture hanging flush to the wall.No.10 and 12 screw heads.Not suitable for grooving applications.Dimensions:Diameter: 12.7mmDiameter: 8mmCutting Length: 4.9mmS=4.6mmShank Diameter: 1/4 inch

A keyhole recess for picture hanging flush to the wall. No.8 and No.10 screw heads. Not suitable for grooving applications.Dimensions:Diameter: 9.5mmDiameter: 4.5mmCutting Length: 4.5mmS=5.5mmShank Diameter: 1/4 in...

A five piece pack for use by kitchen fitters. The pack comprises of five worktop cutter C153DX1/2TC.Cutters are tungsten carbide tipped with a teflon coating and can be used in natural timbers, particle board and fibreboard.Please note th...

Four piece cutter set for use by kitchen fitters comprising two worktop cutters, one long series cutter and one laminate trimmer.Can be used in natural timbers, particle board and fibreboard.Please note that prices in the Trend Catalogue ...

A four piece router cutter pack for use by kitchen fitters. The pack comprises of two worktop cutters C153DX1/2TC, one long series cutter C164X1/2TC and one laminate trimmer C116X1/4TC.Cutters are tungsten carbide tipped with a teflon coating and...

A six piece pack for use by kitchen fitters. The pack comprises of one worktop cutter C153DX1/2TC, one biscuit jointer C152X1/2TC, 3 x metal panel connectors and a bag of ten No 20 biscuits.Cutters are tungsten carbide tipped with a teflon coatin...

Four piece cutter set for use by kitchen fitters comprising two worktop cutters, one biscuit jointer and one laminate trimmer.Can be used in natural timbers, particle board and fibreboard.The biscuit jointer is supplied with three bearings to...

A four piece router cutter pack for use by kitchen fitters. The pack comprises of two worktop cutters C153DX1/2TC, one biscuit jointer C152X1/2TC and one laminate trimmer C116X1/4TC.Cutters are tungsten carbide tipped with a teflon coating and ca...

A cutter to create a knuckle joint for tabletop support, for use on natural timber.For use with 14-15mm thick material.Dimensions:Diameter=23.8 mmCutting Radius: 7.14 mmShank Diameter: 1/4 inchPlease note that prices i...

A cutter to create a knuckle joint for tabletop support, for use on natural timber.For use with 19mm thick material.Dimensions:Diameter=28.5 mmCutting Radius 1: 9.5 mmShank Diameter: 1/4 inchPlease note that prices in ...

All in one work top jig for up to 900mm worktops, for use by tradesmen.Features & Benefits:• Hard wearing solid laminate 12mm thick jig that cuts both parts of the joint in 15 minutes including setting up• Left hand a...

Pack of 4 pins for the KWJ900 worktop jig.Please note that prices in the Trend Catalogue download, if shown below, may differ to the website prices, as those listed in the Catalogue are Trend List Prices excluding VAT....

A one piece set for producing a lambs tongue sash bar and scribe. The set is initially used for scribing. By adding the rebate block onto the arbor, the set can then be used for profiling. To be used with router in stationary mode. Ma...

Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails.For stationary machines - 18000 RPM recommended speed.Dimensions:Diameter: 50mmCutting Length 1: 10.5mm Cutting Length 2: 8.5mmC...

For stationary machines or portable routers mounted in a table.Fixed head use, maximum 18000 rpm.Dimensions:Diameter=50 mmCutting Radius 1: 12 mmShank Diameter: 12 mmPlease note that prices in the Trend Catalogue downl...

This cutter is available in set Refs. CR/PDS1X8mmTC. For stationary machines or portable routers mounted in a tableDimensions:Diameter: 50mmCutting Radius: 12mmShank Diameter: 8mmPlease note that prices in the Trend Ca...