A wider edge finish for furniture. For edge moulding applications only. No bottom cut.Dimensions:Diameter: 36mmCutting Length: 40mmCutting Radius 1: 5mmCutting Radius 2: 13mmShank Diameter: 1/2 inchPlease n...

A cove with a bead within it. Ideal for a small shelf edge or frame mould.Dimensions:Diameter: 24mmCutting Length: 16mmCutting Radius 1: 2mmCutting Radius 2: 8mmShank Diameter: 1/4 inchPlease note that prices i...

An elegant edge mould which gives a narrow appearance to a board edge.Dimensions:Diameter: 22mmCutting Length: 10mmCutting Radius: 3mmShank Diameter: 1/4 inchPlease note that prices in the Trend Catalogue download, if ...

Simultaneously rounds over and profiles the edge.Ideal for pencil round architrave.Dimensions:Diameter: 36mmDiameter: 16mmCutting Length: 29mmCutting Radius: 10mmShank Diameter: 1/2 inchPlease note that prices ...

Especially designed for routing Corian which is used in many bathrooms and kitchens.Dimensions:Diameter: 24mmCutting Length: 15mmShank Diameter: 1/2 inchPlease note that prices in the Trend Catalogue download, if shown bel...

For stationary machines at 12000 RPM recommended speedDimensions:Diameter: 73mmCutting Length: 22mmCutting Radius: 50mmShank Diameter: 1/2 inchPlease note that prices in the Trend Catalogue download, if shown below, ma...

Holds door on its edge while routing hinge recess & mortise for locks.Holds door securely. Non-scratch base. Adjustable clamp for doors 32mm to 55mm thick. Allows door to be tilted back to assist fitting into frame. Maximum door w...

Double Bead cutter from the Dolls house cutter set.Dimensions:Diameter: 1/2 inchDiameter: 12.7 mmCutting Length: 5.5 mmCutting Radius: 0.8 mmShank Diameter: 8mmPlease note that prices in the Trend Catalogue downloa...

For creating a concave radius or cove in the edge of furniture and columns.Dimensions:Diameter: 3/4 inchDiameter: 19.1 mmCutting Length: 1/4 inchCutting Length: 6.35 mmOverall Length: 61.0 mmCutting Radius: 3.2 mmS...

For creating a concave radius or cove in the edge of furniture and columns.Dimensions:Diameter: 57/64 inchDiameter: 22.7 mmCutting Length: 25/64 inchCutting Length: 10 mmOverall Length: 61 mmCutting Radius: 5 mmSha...

Self guided trimmer with ball bearings, fitted to both shank and nose. Allowing templates to be placed either on top or bottom of the material.Dimensions:Diameter=19.1 mmCutting Length: 50 mmBearing Diameter: 19.1 mmShank Diam...

Self guided trimmer with ball bearings, fitted to both shank and nose. Allowing templates to be placed either on top or bottom of the material.Dimensions:Diameter: 3/4 inchDiameter: 19.1 mmCutting Length: 1 inchCutting Length:...

Self guided trimmer with ball bearings, fitted to both shank and nose. Allowing templates to be placed either on top or bottom of the material.Dimensions:Diameter: 3/4 inchDiameter: 19.1mmCutting Length: 50mmBearing Diameter: ...

Trend Double Overlap A=90í X 18mm Dia (Tct Router Cutter Range / Laminate Trimmers)Trimming top and bottom surfaces simultaneously with bearing following the board.Two fluted.Increased productivity.Dimensions:Diameter: 18m...

Trend Double Overlap A=90í X25mm Cut (Tct Router Cutter Range / Overlap Trimmer)Cutter for trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications.Roughing cutter which leaves an overhang of 3mm, for...

Ideal for fluting spindles and other decorative turned work.Has a small flat ground on the nose that produces a very fine cut. Suitable for routing false panel mouldings and engraving work.Dimensions:Diameter: 41.5mmCutting Le...

For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails.Left hand rotation. Purpose made for stair trenching machines.Dimensions:...

For use with commercial dovetailing and stair-housing jigs. The cutter will produce sliding and lapped dovetails, through dovetails and end on dovetails.Left hand rotation. Purpose made for stair trenching machines.Dimensions:...